Showing posts with label Shakedown. Show all posts
Showing posts with label Shakedown. Show all posts

Tuesday, July 20, 2010

Shakedown at Gingerman Raceway RX7

Only a few shakedown laps with the new clutch / flywheel / trans installed in our Miata NASA PTC / TTC Mazda RX7. This was Gingerman career with a test Thursday and melody. The fastest lap of the day was high 42's. Once these problems were resolved in connection with both drivers and vehicles, it should be somewhere in the range low 38-high 37 run. The Gingerman Test and Tune days are an incredible value if you ever in a position that we strongly recommend it. Very relaxed and very funnydifficult track. Just kind of hang on and beat your car specifications Car: '83 Mazda RX7 12A takes up slightly (about 140ish WHP, 160 gross floor area allowed in my class) Amended OEM carb Nikki 2400 pounds with driver (2340 allowed in my class) Miata Trans 225 / 45-13 Hoosier R6 cage auto reverse 4.6 (stock 3.9) welded) Illumi Tokico front / rear shock absorbers Eibach Race Springs Tokico Blue Ground Control Ground Control front camber plates front rebound 1 1 / 8 "(28.5 mm) Joystick Front / rear stabilizer withoutPanhard bar bushings Energy Suspension Poly Urethane safe fuel aircraft fuel cell and cursed a lot of other misc stuff



http://www.youtube.com/watch?v=iEqwi2Row8g&hl=en

Wednesday, June 16, 2010

Rx7 Shakedown at Gingerman Raceway

Just a couple shakedown laps with the new clutch/flywheel/miata trans installed in our NASA PTC/TTC Mazda Rx7. This was at gingerman raceway during a thursday test and tune. The fastest lap of the day was in the high 42's. Once all of the issues with both driver and car have been resolved it should run somewhere in the low 38-high 37 range. The Gingerman Test and Tune days are an amazing value, if you are ever able to do one we would highly suggest it. Very relaxed atmosphere at a very fun and challenging track. Just kinda hang out and beat on your car Car Specs: '83 Mazda Rx7 12A VERY mild street port (about 140ish whp, allowed 160 whp in my class ) Modified OEM Nikki carb 2400lbs with driver (allowed 2340 in my class) Miata Trans 225/45-13 Hoosier R6 Autopower cage 4.6 rear gear (stock is 3.9) welded) Tokico Illuma front/Tokico Blue rear Shocks Eibach Race Springs Ground Control front coilover kit Ground Control front camber plates 1 1/8" (28.5 mm) front sway bar/no rear sway bar Panhard bar Energy Suspension poly bushings Fuel Safe Fuel cell Urethane air damn and a bunch of other misc stuff



http://www.youtube.com/watch?v=iEqwi2Row8g&hl=en